{"product_id":"overtake-post-maf-pipe-kit-subaru-2022-2026-wrx","title":"OVERTAKE Post MAF Pipe Kit - Subaru 2022-2026 WRX","description":"\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Post MAF Pipe Kit\u003c\/strong\u003e replaces the factory post MAF plumbing on the \u003cstrong\u003e2022-2026 WRX \u003c\/strong\u003ewith a\u003cstrong\u003e molded ABS elbow\u003c\/strong\u003e and two \u003cstrong\u003e5-ply silicone couplers\u003c\/strong\u003e. The stock airbox and MAF sensor housing stay put, so nothing about your tune changes.\u003c\/p\u003e\n\u003cp\u003ePull the factory pipe out and look down the inside of it. Two stretches of corrugation and a row of resonator pockets sit directly in the path of everything your turbo is trying to pull.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubaru\u003c\/strong\u003e built that pipe to do two jobs well. The corrugation lets it flex into place during assembly, and the pockets quiet the intake down to something the average driver never notices. Both work as intended, and both come at the cost of a clean path from the airbox to the turbo inlet. The\u003cstrong\u003e OVERTAKE Post MAF Pipe Kit is built for the 2022-2026 WRX \u003c\/strong\u003eand takes the other side of that trade.\u003c\/p\u003e\n\u003ch4\u003eWhy Make the Swap?\u003c\/h4\u003e\n\u003cp\u003eGoing from the factory pipe to a smooth ABS elbow and stepped silicone couplers cleans up the whole run between the airbox and the turbo:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUninterrupted path, no corrugation\u003c\/li\u003e\n\u003cli\u003eNo resonator pockets in the stream\u003c\/li\u003e\n\u003cli\u003eLarger, consistent radius through the bends, smoother flow\u003c\/li\u003e\n\u003cli\u003eCouplers that hold their shape under vacuum\u003c\/li\u003e\n\u003cli\u003eStock airbox and MAF retained, no tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMolded ABS elbow, heat resistant, smooth interior wall and an OEM-plus exterior finish with OVERTAKE branding\u003c\/li\u003e\n\u003cli\u003eTwo 5-ply silicone couplers, steel wire reinforced so they will not collapse or deform under heavy vacuum\u003c\/li\u003e\n\u003cli\u003eStepped coupler design smooths the transition between each segment of the run\u003c\/li\u003e\n\u003cli\u003eMatte black powder coated stainless steel bracket that picks up the factory mounting point on the lower frame rail\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps included, 20 to 30 minute install with hand tools\u003c\/li\u003e\n\u003cli\u003eRetains the federally mandated hydrocarbon filter element in the 2022+ airbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe Details:\u003c\/h4\u003e\n\u003cp\u003eFactory intake plumbing gets designed around assembly line reality and noise targets before it gets designed around airflow. On the VB WRX that means two large corrugated sections so the pipe can flex into position on the line, plus several resonator pockets tuned to keep intake noise out of the cabin. Both features do exactly what Subaru asked of them, and both put obstructions in the path between the airbox and the turbo inlet, with bends abrupt enough to act as choke points on top of that. OVERTAKE went the other direction with a single molded ABS elbow running a consistent radius and a smooth interior wall, joined at each end by a stepped 5-ply silicone coupler that carries the flex the corrugation used to provide. The stainless bracket picks up the factory mounting point on the lower frame rail, so the pipe is supported where Subaru intended rather than riding on the couplers. Expect more intake noise than stock once the pockets are gone, and budget 20 to 30 minutes for the job.\u003c\/p\u003e\n\u003ch4\u003eWhat's In The Box:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 OVERTAKE Post MAF Pipe\u003c\/li\u003e\n\u003cli\u003e1 Airbox Coupler\u003c\/li\u003e\n\u003cli\u003e1 Inlet Coupler\u003c\/li\u003e\n\u003cli\u003e1 Mounting Bracket\u003c\/li\u003e\n\u003cli\u003e4 Hose Clamps\u003c\/li\u003e\n\u003cli\u003e2 Mounting Bolts\u003c\/li\u003e\n\u003cli\u003eReplaces OEM Subaru PN 46011VC000 and 46013VC010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eApplications:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2022-2026 Subaru WRX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OVERTAKE","offers":[{"title":"Default Title","offer_id":56179962380610,"sku":"A10799","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0782\/9294\/3170\/files\/A10799-overtake-post-maf-pipe-kit-2022-26-wrx-1.jpg?v=1789493335","url":"https:\/\/autospecdesign.com\/products\/overtake-post-maf-pipe-kit-subaru-2022-2026-wrx","provider":"AutoSpec Design","version":"1.0","type":"link"}